On Saturday January 10th, 2009 I purchased a 1991 Range Rover Hunter in Santa Fe, New Mexico to replace my rolled 1989 Range Rover. It had just over 160,000 miles on it then.

I have owned my 1991 Range Rover Hunter for 00 years 00 days 00 hours 00 minutes 00 seconds.

Many parts transferred from the 1989.

As of April 19th, 2021 just shy of 287,000 miles, it has a nearly new 4.2L engine. Ready for another 287,000 miles!

Aftermarket Upgrades
12v power outlet added to the opposite side of the original
Aluminum 4 row radiator from eBay seller Winners_Racing
BFGoodrich Mud-Terrain T/A KM3 255/85 R16 tires
Bussman easyID ATC blade fuses
CIPA 3600 day/night 10" rearview mirror with map lights
Columbia Overland aluminum gas tank skid plate
Congleton Service wiper base covers
Dorman First Stop Brake Master Cylinder (M630969)
DV8 Offroad (Drake Offroad) JP-190031-K hood latches
Exmoor rubber floor mats
Expedition Exchange rear lower spring retainers
Expedition Exchange shackle mounting brackets
Fox 2.0 Remote Reservoir Shocks
Flo-Flex extended front and rear bump stops
Flo-Flex radius arm bushings
GM tie downs
Headlight stone guards with custom Edgefinder mounts
Ironman steering dampner
JL Audio XB-BTU battery terminals
Les Richmond snorkel
Magnaflow Y-Pipe (23821)
Magnecor Competition 8.5mm spark plug wires
MSD Blaster 2 coil and bracket
NOCO GCP1 AC port plug with extension cord
NOCO GEN2 2-Bank 20 amp on-board battery charger
No Loss valve caps
NRP stainless steel muffler
Off Road Warehouse 5/8" Urethane Shock Bushing Sets (6) (U66050BLX4)
PowerTank roll bar clamps (used to mount front shock reservoirs)
Rigid Industries/Truck-Lite 7 Inch Round Heated LED Headlamps (55008)
Voltage Gauge with dual USB 2.1A ports
Rovers North front spring dislocation cones
Rovers North heavy duty front shock tower retaining rings
Rovers North spring isolators (on top of front & rear springs)
RoverTym/RTE A-arm extension
RoverTym/RTE adjustable panhard rod
RoverTym/RTE angled 1/2" front spacer
RoverTym/RTE front adjustable height shock towers (newest design)
RoverTym/RTE front lower shock mounts
RoverTym/RTE modified radius arms
RoverTym/RTE rear articulation cones
RoverTym/RTE rear lower shock mounts
RoverTym/RTE rear upper shock mounts
RoverTym/RTE trailing arms
RoverTym/RTE slimline front bumper
RoverTym/RTE steering damper relocation kit
RoverTym/RTE tie rod & track arm
RoverTym/RTE springs (RR1-3 / RR4-3)
Safari Gard front differential guard
Safari Gard rear differential guard
Silblade 18" front wiper blades (could fit 20" in front) & 17" rear
Slickrock Fabrication rock sliders
Sound deadening material applied to roof panel
Superwinch Husky 10 winch
Superwinch Albright Heavy-Duty Solenoid
Tom Woods front & rear double cardon drive shafts
Velcro headliner in Desert Tan (fuzzy loop side)
X2Power Group 34 battery
Original Equipment Accessories, Modifications & Weirdnesses
1989 rear axle housing modified with 1 inch taller spring perches, with 1994 Range Rover 24 spline axles and differential
1992 non-ABS front axle housing with 1994 Range Rover 24 spline axles and differentials
4.2L engine
Amplifier Relocation Kit STC1856
Body side moldings removed
Boge load leveling unit removed
Borg Warner viscous coupler transfer case replaced with a 1996 Discovery LT230 manual locking center differential transfer case
Cigarette lighters removed
Condenser fan (RH) replaced with one from a 1992 Base Model RRC
Door and under hood light switches replaced with newer version PRC8548
Engine block heater PRC9670
Front crossmember modified to allow steeper front drive shaft angles
Front fenders trimmed and rolled to be flush with Rovertym bumper
Front door panel fasteners replaced with 4 steel rivnuts and screws
Front side marker reflectors replaced with Superwinch controller plugs
Grill replaced with early vertical grill & headlight surrounds MUC6308 (RH), MUC8485 (CENTER), MUC6309 (LH)
Jack handles relocated to under the hood
Headlight switch replaced with Defender dome light switch PRC7371
Left rear fender modified to include gas tank door and actuator, operates in tandem with original
Radiator mounting bolt washers removed & replaced with larger washers
Rear frame mounted shipping tie downs removed
Roof screws replaced with 3/4" stainless steel screws, washers and lock washers
Roof sound deadening panels removed
Rear tailgate lamp switch replaced with one from a 1992 RRC
Spare tire area enlarged and modified to fit a BFGoodrich KM2 255/85R16
Under hood light kit added to passenger side of hood
Turn signals replaced with older metal type housings with replaceable lenses
Communications
Uniden Bearcat PC78LTW CB radio
Wilson 1000 roof mount antenna
Yaesu FT-8800R Ham Radio
NMO roof mount antenna
LED Bulb Replacements
Dome
Front Door Puddle
Front Door Front Turn Signal & Running
Headlights
License Plate
Rearview Mirror
Rear side markers
Underhood
Gear
ARB Refrigerator/Freezer Series I 50 Quart
ARB Refrigerator/Freezer custom tie downs
ARB Refrigerator/Freezer Transit Bag
ARB Speedy Seal Puncture Repair Kit
ARB Twin High Performance 12v Portable Air Compressor (CKMTP12)
Colby Emergency Tire Valve
Crosby screw pin anchor shackles from Factor55 (4)
Cross style lug wrench, modified
Demerbox The Indestructible Bluetooth Boombox
easyID fuses (spares)
Factor 55 Hitchlink 2.0 Shackle Mount
Factor 55 Prolink Shackle Mount
Kinetic recovery rope
Mac's Tie Downs Recovery Strap 4" x 30', 35,000 lbs. (140030)
Pelican green 1400 case
Pelican black 1560 cases (2)
Pelican black 1650 case (2)
RAM Mount for iPhone
Superwinch screw pin anchor shackle
Superwinch heavy duty aluminum winch controller
Superwinch heavy duty pulley block
Staun tire deflators
Transit cluster
TJM screw pin anchor shackle (yellow)
Warn receiver shackle
Warn screw pin anchor shackle
Wavian blue 20 liter jerry cans (2) for water
Wavian green 20 liter jerry cans (4) for gas
Wavian red 5 liter jerry can (1) for gas
Wavian green 5 liter jerry cans (2) for coolant and oil
Weigh Safe WS10-2 adjustable hitch (WS10-2)
Winch Saver
Problems and Projects
Center console is continuing to deteriorate
Door panels aging, wood trim separating, need to be redesigned and replaced
Want to Add or Install Eventually
Air tank from a 1995 LWB for additional onboard air capacity, maybe two
Custom Door Panels based on pre-1989 style - I'm thinking worm wood!
Dual batteries and required electronics
Front bumper temporary shelf to hold ARB air compressor case
Replace the fuse cover with one machined from aluminum
Replace the fuse decal PRC8691 with a new one
Replace the ignition key with a push button start with hidden kill switch
Replace the two steering column covers
Replace shifter bezel BTR1955 with a new one
Replace stereo with a JHD1635BTB or JHD1640BTB or future model radio
Replace stereo speakers
Rewire the stereo system
Shave the door handles on all four doors and install touch senstive switches and electric door poppers
Sheepskin seat covers?
More tie downs
[ Back ]   [ Broken Link ]   [ Email ]   [ Home ]